How to Choose a Deep-Well Pump: Measure Well Depth, Dynamic Water Level and Required Flow First
A deep-well pump should not be chosen by power alone. What matters is whether its head and flow match the well: measure the well depth, and especially the dynamic water level after sustained pumping rather than the static level, then work out the required flow from the actual draw-off points and peak use. Total head is roughly the dynamic water level plus the lift to the highest outlet, pipe friction losses and the residual pressure needed at the tap, with a reasonable margin — oversizing can draw the well down and waste power. Also confirm the bore diameter, sand content and power supply before ordering. Installation, cabling and control wiring must be left to qualified personnel. You can compare ranges on our Wilo product pages, or send us the well data and pipe run and we will help you estimate the duty point.